Item: RGB LED strip with controller, remote, portable battery
LED type: 5050 RGB SMD
LED quantity: 30 pieces per meter, 9 pieces per feet
Luminous flux: 12 - 14 Lumen per LED
Beam Angle: 120 degree
Lifespan: 50,000 hours
Length: 2 to 72 inch
Width: 10 mm, approximately 3/8 inch
Height: 3 mm, approximately 1/8 inch
Protection: waterproof, IP65, adhesive backing
3-key controller: 3 keys to control on, off, color, brightness, flash mode and flash speed
Remote controller: 24 keys to control on, off, color, brightness, flash mode and flash speed.
Leads: 300 mm from battery to LED strip, approximately 12 inch; we make custom length leads if needed
Working voltage: DC 9 to 12 volt
Portable battery: 12 volt and 5 volt dual output, free battery charger, see more detail information of the battery under category OTHER ITEMS
Feature: Super bright, low power consumption, plug and play, interior and exterior lighting, every 3-LED can be cut without damaging LED strip, length of LED strip could be up to 5 meter with 300 pieces LED.
THE RECHARGEABLE BATTERY CAN RUN 6 FEET OF THIS ITEM ABOUT 7 HOURS. FOR LONGER LED STRIP AND/OR LONGER TIME, TRY SIMILAR ITEM RUN BY AC-DC POWER ADAPTER.
Posted by Unknown on Apr 7th 2016
I ordered a 4 inch strip and the product arrived quickly and worked precisely as advertised. The remote worked right out of the package and the lights are vibrant.
The 3M adhesive was not as sticky as I wanted, but I attached the LED strip to a leatherette type surface so that may have been a factor — a little drop of super glue worked.
Posted by Andy on Feb 15th 2016
These work great! I think that it is awesome that Glow Hut will make modifications to the base units to better fit an application. Thank you to Mark for modifications to the strips that I purchased. He added 18" of wire between the controller and the IR sensor so I could hide it, and mount the sensor in a more suitable location to better pick up the remote control. Please note that the adhesive on these strips is rather light. I did have problems getting them to stick. Ended up putting hook and loop (velcro) on the back of the strips with another piece in the mounting location to secure, now I can remove them if I ever need to as well.
Posted by Tom on Jun 30th 2015
great product....purchased several times .. works as promised... fast delivery. will buy again
Posted by Unknown on Jun 10th 2015
The product arrived in perfect condition and worked immediately.
All prices are in USD